NORMS & STANDARDS
Fire extinguisher norms and standards
A guide to official sources on the number, placement and maintenance of fire extinguishers in Azerbaijan.
The texts below are brief summaries of official documents. Each section gives the document title, the relevant provision and a link to the official source. For a particular facility, refer to the scope and full text of the applicable document.
01 / GENERAL REQUIREMENTS
Initial firefighting equipment and certification
“Fire Safety Rules in the Republic of Azerbaijan” — Order No. 85 of 25 May 2001; state registration No. 2693.
Clause 10.4 requires rooms, buildings and structures to be equipped with initial firefighting equipment in accordance with the applicable norms. Firefighting equipment without the appropriate certificate may not be used.
See clause 10.4 in the document.
02 / QUANTITIES AND PROVISION
How many fire extinguishers does a facility need?
Quantity tables vary by the purpose of the facility and the type of extinguisher. The following rules have different scopes; one table should not be applied to every type of facility.
Administrative buildings, hotels, dormitories and garages
“Fire Safety Rules for Private Garages, Hotels, Dormitories, Residential Buildings and Administrative Buildings” — Order No. 43 of 6 May 2002; registration No. 2837.
Annex 6 provides a table showing floor area or corridor length, extinguisher type and minimum quantities for the listed facilities. The table’s notes must also be taken into account.
Retail, public catering, supply depots and warehouses
“Fire Safety Rules for Retail and Public Catering Establishments, Fairs, Supply Depots and Warehouses” — Order No. 43 of 6 May 2002; registration No. 2838.
Annex 1 sets out the provision of initial firefighting equipment by facility type and protected area.
03 / PLACEMENT
Where and how should extinguishers be placed?
Clauses 3.9.1–3.9.3 of the rules registered under No. 2837 specify the following for facilities within that document’s scope:
- The placement height of the extinguisher must not exceed 1.5 metres above ground level.
- For suspended mounting, the distance from the corner of the doorway must be at least 1.2 metres.
- The extinguisher must not obstruct an evacuation route, and the information on its body must remain visible.
- When stored in a cabinet, the type of extinguisher must be identifiable.
These dimensions relate to the scope of the above-mentioned rules registered under No. 2837.
04 / MAINTENANCE
Inspection and maintenance requirements
According to clauses 6.6–6.7 of the rules registered under No. 2838, covering retail and public catering establishments, fairs, supply depots and warehouses:
- Responsible persons and members of the voluntary fire brigade check serviceability daily.
- Placement, maintenance and use must take account of the manufacturer’s instructions and normative technical documents.
- Members of the voluntary fire brigade must carry out an external inspection and remove dust at least every 10 days.
- The suitability of the charge in foam extinguishers must be checked at least annually, and the strength of the body must be checked every year.
- Carbon dioxide extinguishers must be protected from heating and sunlight and checked by weighing at least annually.
05 / STATE STANDARDS
AZSTAND’s official adoption announcement
AZSTAND’s report of 12 October 2026 on the first nine months of the year lists the adoption of the following fire extinguisher standards:
- AZS ГОСТ Р 51057:2026 — a standard concerning general technical requirements and test methods for fire extinguishers.
- AZS ГОСТ Р 51017:2026 (ГОСТ Р 51017-2009) — a standard concerning general technical requirements and testing methods for fire extinguishers.
See items 5 and 14 in section 22 of the official report. The link opens the adoption announcement, not the full standards. Their scope and technical provisions must be checked in the standards themselves.
